1051 Overview

Locking recessed hard lid ceiling or wall mount Wi-Tile™ enclosure is designed for Wi-Fi and small cell wireless APs and DAS remote units with integrated or detachable antennas. This aesthetic, white powder-coated steel enclosure has an 17.5 in. square bezel which fastens into the ceiling or wall and simplifies access point moves, adds, and changes. Interchangeable retrofit doors allow current owners to upgrade to new AP or antenna solutions from different vendors by swapping doors. 

Features & Benefits

• Secure, conceal, and protect Wi-Fi and small cell APs in hard ceiling areas 
• Interchangeable doors permit simple migration to new APs and antennas 
• Back-box is deep enough to contain most vendors APs and connectors 
• Enclosure back-box is effective dust barrier to simplify ICRA procedure compliance 

Technical Specifications

• Design: 4.5 in. deep AP or DAS Remote Unit enclosure designed for recess installation in hard-lid ceilings (drywall, plaster and lath, stucco, block, core plank, etc.). Internal T-bar accommodates APs from most manufacturers 
• This is a steel enclosure so antennas or APs be mounted externally on the door 
• Performance: UL 50 listed for line voltage powered equipment, and designed to meet NEC300-22 and 300-23 for plenum installations. HCAI approved OPM-0110. De-rate AP operating temperature range by 6°C when mounted in enclosure 
• Fully hinged locking door, keyed alike. Doors are interchangeable 
• Firestop grommet for insertion into back-box, large enough for 2 Cat6A cables 
• 1 in. trade size knockouts in four walls 
• Enclosure back box is effective as a dust barrier for ICRA procedure compliance 
• -CCEA version backbox is sealed to be used in pressurized rooms, and to be compliant with City of Chicago Environmental Air (CCEA) plenum requirement 
• Construction: 16 ga. back-box, 14 ga. door, textured white powder-coated steel. 
• Size: Flange is 17.5 x 17.5 in. (445 x 445 mm). Back-box is 12.5 x 12.5 x 4.5 in. (318 x 318 x 114 mm). 4 in. (101 mm) useful depth with universal T-bar bracket in place 
• Maximum weight to be installed inside enclosure is 25 lbs. (11.3 kg) 
• Made in the USA 

Includes

• (4) Wire Hangers 
• (1) T-Bar Bracket 
• (1) Dual Cable Egress Fire Stop Grommet 
• (1) 1 in. Trade Size Conduit Connector 
• (4) White Cosmetic Screw Caps 
• (4) #10 Ceiling/Wall Attachment Screws 
• (1) Grounding Screw 
• (2) Keys for lock 
• Installation Instructions 

Safety Standards

• UL 50 listed, TYPE 1, for indoor use only 
• UL Listed and designed to meet National Electric Code Paragraphs 300-22 and 300-23 for installation in the above-ceiling space 
• USL – Investigated using requirements contained in Standard UL 50 – Twelfth Edition, and UL 50E – First Edition 
• CNL – Investigated using requirements contained in Canadian Standard CSA/C22.2 No. 94.1 and 94.2 
• UL 2416, Audio/Video, Information and Communication Technology Equipment Cabinet, Enclosure & Rack Systems 
• CSA C22.2 NO. 60950-1-07 + Amd. 1 Amd. 2 Information Technology Equipment — Safety. Part 1, General Requirements 
• HCAI Approval OPM-110 

For use with the following Wi-Fi/Small Cell Access Points