Home SiteMap Contact
 
 
 

  Blog

  

Model1042 ANTMNT ZDualConveniently mount wireless access points and antennas in virtually any type of ceiling with Oberon’s newest solution.

 

 


1040-ANTMNT

1040 with knockouts to support antenna installation

1040-ANTMNT: Model1040_ZDual.jpg

Oberon symbol Spec Sheet
Installation Instructions
Customer Prints
  3D Model Viewer

Orientation: Ceiling

Cloud/canopy/suspended ceiling mounting kit for most vendors’ APs and antennas. A cutout is made in the ceiling panel, the panel bridge is placed above the ceiling panel, and AP or antenna is attached to the white trim. AP/antenna/trim assembly is then drawn into the panel bridge with a torsion spring, as in certain recessed lighting fixtures, with only the front face exposed for optimal wireless coverage. Model 1040-FL recesses AP behind a low-profile ABS plastic cover. Trim is easily swapped out for new APs and antennas without tools.

1042-ANTMNT

1042 with knockouts to support antenna installation

1042-ANTMNT: Model1042-ANTMNT_ZDual.jpg

Oberon symbol Spec Sheet
Customer Prints
  3D Model Viewer

Orientation: Ceiling

The Model 1042 series offers the simplest way to mount APs and antennas into existing hard (drywall/sheetrock) ceilings and walls for an aesthetic, professional installation. A cutout is made in the ceiling and the all metal back-box is fastened into the ceiling. The AP or antenna fastens to the appropriate trim, and the trim attaches to the to the back-box with torsion springs. The AP is recessed into the ceiling much like a recessed light fixture. AP trim is easily swapped for new trim when AP brand or model changes. (Model 1042-FL recesses AP entirely behind a low-profile ABS plastic cover). See configuration guide in specs for AP-specific trims.

1043-ANTMNT

1043 with knockouts to support antenna installation

1043-ANTMNT: Model1042-ANTMNT_ZDual.jpg

Oberon symbol Spec Sheet
Customer Prints

Orientation: Ceiling

The Model 1043 series offers the simplest way to mount APs and antennas into new hard (drywall/sheetrock) ceilings and walls for an aesthetic, professional installation. The back-box is fastened to the ceiling joists, and the new ceiling is cut around the box. The AP or antenna fastens to the appropriate trim, and the trim attaches to the back-box with torsion springs. The AP is recessed into the ceiling much like a recessed light fixture. AP/antenna trim is easily swapped when AP/antenna brand or model changes. (Model 1043-FL recesses AP entirely behind a low-profile ABS plastic cover). See configuration guide in specs for AP-specific trims.

1044-ANTMNT

1044 with knockouts to support antenna installation

1044-ANTMNT: Model1040_ZDual.jpg

Oberon symbol Spec Sheet
OSHPD OPM Drawing
  3D  Model Viewer: Aruba AP

Orientation: Ceiling

The Model 1044 is an economical, aesthetic, and easy-to-install suspended ceiling mounting kit for APs and antennas from most vendors. A cutout is made in the ceiling tile, and the tile bridge is placed above the ceiling tile. The AP or antenna is attached to the white trim. The AP/antenna/trim assembly is then drawn into the ceiling tile bridge with torsion springs, as with some recessed lighting fixtures, with only the front face exposed for ideal, unobstructed wireless coverage. Model 1044-FL recesses AP behind a low profile ABS plastic cover. AP trim can be easily swapped out for new trim if the AP brand or model is changed in the future.

 

Wireless Access Point Mounting Solutions & Enclosures

Find an Oberon enclosure
or mounting solution
for your wireless equipment

Share This

Follow Us