pdf PDF

Oberon Logo5 Model 1043-ANTMNT
1043 with knockouts to support antenna installation
Category: Wall and Hard Ceiling - Recess Mount
Shown with ZDual antennas (not included)

The Model 1043 series offers the simplest way to mount APs and antennas into new hard (drywall/sheetrock) ceilings and walls for an aesthetic, professional installation. The back-box is fastened to the ceiling joists, and the new ceiling is cut around the box. The AP or antenna fastens to the appropriate trim, and the trim attaches to the back-box with torsion springs. The AP is recessed into the ceiling much like a recessed light fixture. AP/antenna trim is easily swapped when AP/antenna brand or model changes. (Model 1043-FL recesses AP entirely behind a low-profile ABS plastic cover). See configuration guide in specs for AP-specific trims.

Patent pending
Cisco Developer Aruba Networks Certified
Shown with DAS antenna (not included) Shown with Cisco antenna (not included) Firestop Grommet
Features & Benefits
  • Economical and easy to install
  • Conveniently and quickly install APs and antennas from most vendors into new hard ceiling environments
  • AP and antennas mount flush to the ceiling, providing an aesthetic, professionally installed appearance
Technical Specifications
  • Design: Economical, recessed hard ceiling or wall installation kit designed for APs and antennas. For new drywall, sheetrock, gypsum board hard ceilings and walls (new construction). AP or antenna mounts in interchangeable bracket and trim, providing a professional finish. Designed for all leading vendors’ APs and antennas, as identified in Oberon’s model 1043 configuration guide
  • Performance: UL listed for low voltage applications, and designed to meet NEC300-22 and 300-23 for plenum installations. De-rate AP operating temperature range by 10°C when mounted in enclosure
  • AP/antenna bracket and trim is interchangeable for other APs or antennas, without removing back-box
  • Firestop grommet for insertion into back-box, large enough for 2 Cat 6A cables
  • 1 in. trade size knockouts in two walls
  • Ceiling/wall bridges secure enclosure into ceiling joists
  • Construction: 20 ga. galvanized steel back-box, and white, powder-coated 20 ga. steel trim. Solid back-box fills opening behind AP, creating an effective fire, smoke and dust barrier to simplify ICRA compliance. (Model 1042-FL only: Paintable, UL 94-5VA ABS Plastic cover)
  • Constructed to be compliant with City of Chicago Environmental Air (CCEA) plenum requirements
  • Maximum weight inside enclosure is 25 lbs.
  • Size: Trim is 14.67 x 14.67 x 0.3 in. (373 x 373 x 8 mm). Back-box is 11 x 11 x 3 in. (280 x 280 x 76 mm)
Standards for Safety
  • UL 2416, Audio/Video, Information and Communication Technology Equipment Cabinet, Enclosure & Rack Systems
  • CSA C22.2 NO. 60950-1-07 + Amd. 1 Amd. 2 Information Technology Equipment -- Safety. Part 1, General Requirements
Measurements (Maximum values):
  • Width: 11 in.
  • Height: 11 in.
  • Depth: 3 in.
  • Item Weight: 5 lbs.
  • Shipping Weight: 6 lbs.
  • (1) Galvanized steel back-box
  • (1) Ceiling/ wall bridge
  • (1) AP or antenna specific bracket and trim; (See Oberon’s model 1043 configuration guide)
  • Model 1043-FL ONLY: (1) Cisco Mounting bracket, (1) AP mount T-bar bracket, and (1) ABS plastic cover
  • (1) 1 in. conduit fitting with nut
  • (1) Firestop cable grommet, large enough for 2 Cat 6A cables
  • (4) #6-32 X 1/2 in. white screw
  • Installation instructions

Configurations: Model 1043

AP or antenna specific trim is included with the product; please specify the SKU required when ordering.
Note: The trim is interchangeable after installation. Please see configuration guide for retrofit trim P/N options.

1043 - Specifiy AP trim
(see Configurations)
SKU Description Retrofit trim P/N
1043-AP215 Trim for Aruba Networks AP215 37-104X-AP215-S2
1043-AP225 Trim for Aruba Networks AP225 37-104X-AP225-S2
1043-AP305 Trim for Aruba Networks AP305 37-104X-AP305-S2
1043-AP315 Trim for Aruba Networks AP315 37-104X-AP315-S2
1043-AP325 Trim for Aruba Networks AP325 37-104X-AP325-S2
1043-AP335 Trim for Aruba Networks AP335 37-104X-AP335-S2
1043-CCOAP Trim for
Cisco 2600, 2700, 3500, 3600, 3700 Series APs
1043-CCOAP3800 Trim for
Cisco 2800, 3800 Series APs
1043-FL Low profile white ABS snap on cover 37-104X-FL-S2
1043-BLANK Blanking plate to temporarily fill cutout in ceiling 37-104X-BLANK-F
1043-ANTMNT Trim with knockouts to support external antennas 37-104X-ANTMNT-S2

For old construction, refer to the Model 1042 Series

 Oberon, Inc. YouTube Channel - (https://www.youtube.com/user/oberoninc)
 1043 Installation Video - (https://youtu.be/K6q8_wWA-Bg)

Documentation Links
Oberon symbol Spec Sheet - oberoninc.com/index.php?option=com_content&view=article&id=4927&Itemid=399
 Customer Prints - oberoninc.com/images/WebDocs/37-104X-ANTMNT-S_Customer_Print.pdf
 Images and documents may depict similar models in the product series.