pdf PDF

Oberon Logo5 Model 1019-RM
14 in. Recessed Wall and Hard-Lid Ceiling Mounted Plastic WiFi Access Point Enclosure with Low Profile Snap-on Cover
Category: Wall and Hard Ceiling - Recess Mount
 
Shown ceiling cutaway with Cisco AP (not included)

Oberon’s Model 1019 provides the simplest way to recess APs into a dry-wall ceiling or wall for an aesthetic, professional installation. The 1019 is an all plastic recess box with mounting features for most vendors APs. The recess box installs into an opening in the ceiling or wall in minutes. The AP, surface mount box, patch cord, and associated cabling are organized inside the recess box, and the low profile cover snaps into place. The paintable white cover largely blends into most ceilings or walls, and is comprised of a thin PC/ABS composite plastic which is virtually transparent to the wireless signal. The 1019 is the ideal solution in venues where the AP needs to "visually disappear", yet must provide the best wireless coverage and performance.


Cisco Developer Aruba Networks Certified
 
Shown wall cutaway with Cisco AP (not included) Shown with cover Exploded view
Features & Benefits
  • Recess APs into hard lid ceiling or wall environment
  • Paintable snap-on cover is almost flush to wall
  • Easily fastens to drywall using swivel fasteners
  • Secures, conceals, and organizes cabling and patch cords
  • All plastic enclosure minimizes RF interference
Technical Specifications
  • Design: Non-metallic AP flush-mount enclosure. Designed to conceal and secure APs with integrated or non-detachable antennas
  • Performance: Ventilated, paintable, impact resistant, and flame retardant PC/ABS plastic enclosure is virtually transparent to wireless signals
  • Snap-on cover with concealed attachment points can optionally be screwed on for added security
  • Universal T-bar mounting plate for most vendor’s APs, mounting features for Cisco APs
  • Built-in and removable cable management features
  • Construction: Flame retardant PC/ABS plastic. All PC/ABS components are white. 18 gauge galvanized steel AP mounting plate
  • Size: Cage (backbox) is 13.5 x 13.5 x 3.7 in. (343 x 343 x 94 mm). Cover is 15.7 x 15.7 in. (400 x 400 mm)
Measurements (Maximum values):
  • Width: 13.5 in.
  • Height: 13.5 in.
  • Depth: 3.7 in.
  • Item Weight: 3.5 lbs.
  • Shipping Weight: 4 lbs.
Includes
  • (1) Enclosure Cage
  • (1) Hard Lid Surface Attachment Bezel
  • (1) AP Mounting Plate
  • (1) Tamper Resistant Snap-on Cover
  • (1) Spare Swivel Fasteners
  • (6) Removable Cable Management Pegs
  • (4) #6 - 19B x 1/4 in. Screws
  • (4) #8 - 18A x 1/4 in. Screws
  • (4) #4 - 24A x 1-1/2 in. Screws
  • Installation instructions
3D Interactive Models
3D Model Viewer at oberoninc.com

Documentation Links
Oberon symbol Spec Sheet - oberoninc.com/index.php?option=com_content&view=article&id=4856&Itemid=399
 Installation Instructions - oberoninc.com/images/WebDocs/Model1019-RM_Installation_Instructions.pdf
 Customer Prints - oberoninc.com/images/WebDocs/Model1019-RM_Customer_Print.pdf
 SECTION 27_21_33 DATA COMMUNICATIONS WIRELESS ACCESS POINTS
http://oberoninc.com/images/WebDocs/SECTION_27_21_33_DATA_COMMUNICATIONS_WIRELESS_ACCESS_POINTS.pdf
 Images and documents may depict similar models in the product series.