pdf PDF

Oberon Logo5 Model 3030
12.5 in. Diameter Netpost™ Heavy Duty Fiberglass WiFi Access Point Bollard / Standard Style / Black / 57 in. Height
Category: Indoor/Outdoor NEMA
Shown in bronze

Oberon's NetPost™ 3030 Wireless Bollard is ideal for extending wireless and Wi-Fi coverage into open public spaces such as parks, outdoor malls, and bus stops. The wireless bollard can be used to mount the Wi-Fi APin locations where Wi-Fi coverage is most needed, and avoiding the need to mount on buildings or light poles. This rugged fiberglass bollard is weather proof and tamper resistant, and is designed to protect wireless equipment in open public areas. The fiberglass construction is virtually transparent to wireless signal. Large enough for APs, omni-directional and directional antennas, and small network switches from most vendors.

Cisco Developer Aruba Networks Certified
Bollard Cutaway Shown with Cisco 1562 AP (Not included) Shown with Cisco 3800 AP (Not included) Shown in grey Park installation
Features & Benefits
  • NetPost™ Heavy duty Wireless Bollard for outdoor extension of Wi-Fi coverage in public areas
  • Protect AP, antennas, cabling, power supplies, and switch from weather, spilling liquids, and tampering
  • Virtually transparent to wireless signal
  • Large enough for most vendor’s APs, dipole or panel antennas, and small network switch
Technical Specifications
  • Design: Cylindrical fiberglass Wi-Fi bollard. Designed to protect APs and antennas in outdoor public spaces. Designed for permanent AC line voltage and low voltage installations. Interior equipment stand for mounting APs and antennas
  • Performance: Designed to protect equipment from tampering, abuse, and weather. NEMA 3R performance for indoor/outdoor environments. Fiberglass is virtually transparent to wireless signals
  • Anchors to pre-installed concrete pedestal. Cabling is conducted through conduit in pedestal
  • Available in 3 standard colors. Paintable
  • Includes anchor base, equipment stand, hardware to fasten APs and antennas. Bolt cover and tamper resistant hardware
  • Construction: 0.25 in. thick centrifugal cast fiberglass composite bollard (65% glass, 35% resin). Paint is UV and cleaning chemical resistant. Zinc coated, 0.25 in. thick steel anchor base. Fiberglass equipment mounting stand. ABS plastic bolt cover, painted to match bollard
  • Size: 57 in. (1,384 mm) above grade, 12.5 in. (318 mm) inner diameter. Anchor base is 15.25 x 15.25 in.
  • Weight: 63 lbs.
Measurements (Maximum values):
  • Width: 12.5 in. inner diameter
  • Height: 57 in. above grade
  • Depth: 12.5 in. inner diameter
  • Item Weight: 40 lbs. (w/base 63 lbs.)
  • Shipping Weight: 73 lbs.
  • (1) Fiberglass Bollard
  • (1) Internal fiberglass AP and antenna mounting pole
  • (1) Anchor base and hardware to fasten bollard
  • (1) U-bolts and AP and antenna mounting hardware
  • (1) Color matched ABS anchor base bolt cover with tamper-resistant hardware
  • (1) Installation Instructions

Configurations: Model 3030

Please specify configuration when ordering.

3030 - STYLE
00: Beveled top
FT: Flat top*
Black (BK)
Bronze (BZ)
Grey (GY)
* Flat top in Black (BK) only
Example: 3030 - 00 - BK
Black Beveled top Bollard
Available Accessories
  • 39-303X-FOOTING-KIT- Includes four 18 in. long anchor bolts, hardware, and template for permanent concrete footing for the bollard
 Oberon, Inc. YouTube Channel - (https://www.youtube.com/user/oberoninc)
 Protecting Outside Wireless Equipment, Antennas and Related Components - (https://youtu.be/JqIwZGDGs9g)

Documentation Links
Oberon symbol Spec Sheet - oberoninc.com/index.php?option=com_content&view=article&id=4561&Itemid=399
 Installation Instructions - oberoninc.com/images/WebDocs/Model3030_Installation_Instructions.pdf
 Customer Prints - oberoninc.com/images/WebDocs/Model3030_Customer_Print.pdf
 Images and documents may depict similar models in the product series.