pdf PDF

Oberon Logo5 Model 1020-00-RAB-PMK
NEMA 4 AP Enclosure :Screw-on cover, Right-angle
Category: Indoor/Outdoor NEMA
 
Wall Mounted

Oberon’s model 1020 series compact NEMA 4 AP enclosure is designed specifically to protect APs in challenging environments such as stadiums, auditoriums, gymnasiums, industry and outdoors. This rugged polycarbonate enclosure protects the AP from weather, pressure spray, spilling liquids, dust, and impacts, and is transparent to wireless signals so APs with body integrated antennas or small detachable antennas may be protected. The enclosure is paintable. This is the smallest NEMA 4 enclosure for most APs and is ideal for under-seat installation in stadiums. Available with clear cover (-C), Under Seat Mounting 30º bracket (-USM30), Right Angle Bracket (-RAB) for wall mounting, and with Pole Mount Kit (PMK) for mounting on light poles.


Cisco Developer Aruba Networks Certified ideal for wireless networks
 
View from top View from bottom
Features & Benefits
  • Compact, rugged NEMA 4 enclosure for installing APs in physically challenging environments. Ideal for under seating and riser installations
  • Virtually transparent to wireless signals
  • Plastic is easily drilled and machined for custom cable ingress and installation. Enclosure is paintable
  • Cover attaches with four tamper resistant stainless steel screws, available with clear cover
  • Available in underseat mounting, wall mounting, and pole mounting configurations
Technical Specifications
  • Design: Compact, rugged polycarbonate AP enclosure designed for surface mounting AP indoors or outdoors, and for under seating and riser installation, wall mounting, or light pole mounting
  • Performance: Designed to NEMA 1, 2, 4, 4X, 12, and 13, and IEC529-IP66 specifications for indoor/ outdoor wet, dirty, or corrosive environments. UV stabilized for exposure to direct sunlight. Transparent to wireless signals. Paintable
  • Oberon Skybar shaped screw on cover with gasket. Cover screws must be torqued to 8 in-lbs. Cover screws are recessed into cover. Comes with standard and tamper resistant screws
  • Internal universal T-bar bracket
  • AP max. operating temperature should be de-rated by 11° C inside the enclosure
  • Construction:
    • -00: Body and cover are light gray UL94-V0 PBT/PC blended plastic
    • -C: Add clear cover, UL94-V0 PBT/PC blended plastic
    • -RAB: Add exterior grey powder coated 10ga steel right-angle wall mounting bracket
    • -PMK: Add Adjustable worm gear stainless steel clamps
    • -USM30: Add aluminum, grey, powder coated 30 degree angle bracket
  • -C configuration has a clear screw on cover to allow visibility of status LEDs
  • -RAB configuration mounts AP in preferred horizontal orientation on walls. Right angle bracket acts as a sun shield to reduce solar heat load
  • -PMK configuration has adjustable worm gear clamps for square and round poles with diameters from 4 to 7 in. (requires -RAB)
  • -USM30 mounts AP at 30° angle in under seat installations, or on high walls
Measurements (Maximum values):
  • Width: 12.77 in.
  • Height: 9.06 in.
  • Depth: 6.2 in.
  • Item Weight: 10 lbs.
  • Shipping Weight: 11 lbs.
Includes
  • (1) UL94-V0 Gray Polycarbonate NEMA 4 Enclosure
  • (1) T-bar bracket
  • (4) Cushioning washers
  • (4) #6 x 1/4 in. flat head screws
  • (4) #6 x 1/4 in. pan head screws
  • (4) M4 x 20 mm lid screw
  • (4) M4 x 20 mm Torx head tamper resistant lid screws
  • Gray powder coated steel right angle bracket
  • (4) M4 x 10 mm Bracket Screw
  • (4) 4 mm Lock Washer
  • (2) Worm Drive Clamp 5-5/8 to 8-1/2 in. ID
  • (4) Stainless Steel #10 screws
  • Installation instructions

Configurations: Model 1020

Please specify configuration when ordering.

1020 - Lid Style
00: Solid Grey
C: Clear
- Bracket Style
RAB: Right Angle
USM30: 30° Under Seat
(otherwise leave blank)
- Mount Style
PMK: Pole Mounting Kit
(with -RAB only)
(otherwise leave blank)
SKU Description
1020-00 Polycarbonate NEMA 4 AP Enclosure: Screw-on cover
1020-C Polycarbonate NEMA 4 AP Enclosure: Screw-on clear cover
1020-00-RAB NEMA 4 AP Enclosure: Screw-on cover, Right-angle
1020-C-RAB NEMA 4 AP Enclosure: Screw-on clear cover, Right-angle
1020-00-RAB-PMK NEMA 4 AP Enclosure: Screw-on cover, Right-angle pole mount
1020-C-RAB-PMK NEMA 4 AP Enclosure: Screw-on clear cover, Right-angle pole mount
1020-00-USM30 NEMA 4 AP Enclosure: Screw-on cover
Available Accessories
3D Interactive Models
3D Model Viewer at oberoninc.com

Documentation Links
Oberon symbol Spec Sheet - oberoninc.com/index.php?option=com_content&view=article&id=3086&Itemid=399
 Installation Instructions - oberoninc.com/images/WebDocs/Model1020-RAB-PMK_Installation_Instructions.pdf
 Customer Prints - oberoninc.com/images/WebDocs/Model1020-00-RAB-PMK_Customer_Print.pdf
 App Note - Wireless Coverage FAQ - oberoninc.com/images/WebDocs/Model1025-00_coverage_FAQ.pdf
 App Note - Installation Tips for NEMA 4 Enclosures - oberoninc.com/images/WebDocs/App Note - Installation Tips for Oberon NEMA 4 Enclosures.pdf
 SECTION 27_21_33 DATA COMMUNICATIONS WIRELESS ACCESS POINTS
http://oberoninc.com/images/WebDocs/SECTION_27_21_33_DATA_COMMUNICATIONS_WIRELESS_ACCESS_POINTS.pdf
 Images and documents may depict similar models in the product series.